ROGER M90/F4ES Photocell Sensor in UAE

ROGER M90/F4ES Photocell Sensor UAE

Infrared Gate Safety Photocell Sensor for Automatic Gate Automation

The ROGER M90/F4ES Photocell Sensor is a safety photocell designed for automatic gate and access automation systems. It uses a transmitter and receiver safety-beam arrangement to monitor the gate movement area and help the control system detect vehicles, people or other obstacles.

Designed for professional gate automation applications, the ROGER M90/F4ES can be used with suitable sliding gates, swing gates, garage door openers, parking barriers and other compatible automation equipment. Correctly installed photocells improve operational safety by providing an external safety input to the automation control board.

The product is suitable for replacement, new installation and maintenance projects where reliable obstacle detection is required. Installation position, wiring, power supply and control-board input must match the manufacturer's requirements for dependable operation.

For UAE installations, the ROGER M90/F4ES provides a practical safety solution for villas, residential compounds, commercial entrances, warehouses, parking areas and industrial gate automation systems.

ROGER M90/F4ES Features

• Infrared safety-beam obstacle detection
• Power supply: 24V AC 50HZ - 12/24 DC
• Detection range: 10 - 15 m
• Designed for automatic gate safety applications
• Supports safer automatic opening and closing cycles
• Suitable for professional installation and replacement projects
• Residential, commercial and industrial automation use
• Protection rating: IP55

ROGER M90/F4ES Photocell Sensor Technical Specification

• Brand: ROGER
• Model: ROGER M90/F4ES Photocell Sensor
• Product Type: Photocell Safety Sensor
• Standard power: 24V AC 50HZ - 12/24 DC
• Absorption: TX=18mA, RX=27mA
• Operating temperature: 20+55°C
• Protection level: IP55
• Maximum distance in open field: 10 - 15 m
• Maximun number of photocells synchronized: 4
• Relay contacts max current: 0,5A RX
• Relay contacts max voltage: 30V
• Technical Detail: Pair of synchronized photocells series M90 slim fix version 24V AC/DC up to 4 pair

Applications

• Automatic sliding gates
• Automatic swing gates
• Garage door automation
• Parking gate barriers
• Residential gate automation
• Commercial entrances
• Warehouse and industrial gates
• Access control safety systems

Why Choose ROGER M90/F4ES?

• Purpose-built for gate safety and obstacle detection
• Suitable for professional gate automation installations
• Useful for replacement, maintenance and new automation projects
• Supports residential, commercial and industrial access applications
• Technical compatibility can be checked before installation

Why Choose Gate-Motor.com

Gate-Motor.com helps customers select the correct automation accessory by checking the product model, electrical requirements and intended gate system before installation. This is particularly important for photocell sensors and flashing lights because voltage, wiring and control-board compatibility can vary between automation systems.

• Specialist range of gate automation safety sensors, flashing lights and spare parts
• Product selection based on brand, model, voltage, wiring and control-board requirements
• Compatibility guidance before replacement or new installation
• Professional installation, troubleshooting and maintenance support
• Automation accessories for leading European and international gate motor brands
• Solutions for sliding gates, swing gates, garage doors, parking barriers and access-control systems
• UAE-wide technical and after-sales support for residential, commercial and industrial projects

Frequently Asked Questions

What is the ROGER M90/F4ES used for?

The ROGER M90/F4ES is used as an automatic gate safety sensor to detect an interrupted infrared beam and provide a safety signal to a compatible automation control system.

What is the detection range of the ROGER M90/F4ES?

The available product specification lists a detection range of 10 - 15 m.

Can the ROGER M90/F4ES be used with sliding and swing gates?

It can be used where the gate control board provides the correct photocell safety input and electrical specification. Compatibility should be confirmed before installation.

Does the ROGER M90/F4ES help stop or reverse an automatic gate?

When correctly connected to a compatible control board, the photocell provides an obstacle/safety input. The resulting stop or reverse action depends on the programmed control-board logic.

Is installation and technical support available in UAE?

Yes. Gate-Motor.com provides product selection, compatibility guidance, installation assistance, maintenance and after-sales technical support across the UAE.

Looking for the ROGER M90/F4ES Photocell Sensor in UAE? Gate-Motor.com supplies gate photocell sensors, infrared safety sensors and automation safety accessories for sliding gates, swing gates, garage doors and parking barriers. Compatibility guidance, professional installation, maintenance and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.