SOMMER Swing Gate Motor Supplier in UAE

Sommer Twist XL Swing Gate Motor kit up to 1100 kg in Dubai, Ajman, Sharjah, Abu Dhabi UAE.

Specifications:

• Flexible:

  • universally suitable for gates opening to the left and right
  • 1- and 2-leaf operations possible as well as mixed operations with twist 200 E/EL and twist 350
  • also applicable for closed gate fillings
  • also for gates which open to the outside
  • microprocessor control board with a range of setting options, such as pedestrian door function, automatic closing of gate, adjustable early warning time, adjustable functions when obstacle is encountered while door is closing (either total or partial gate reversal)
  • interface for TorMinal programming device
  • quick installation and easy electrical connection

  Secure:

  • self-locking without any electrical lock (up to 5 m)
  • accident prevention with continuous electronically controlled force measurement (“DPS – Dynamic Power System”)
  • operator can be engaged and disengaged in any position (e.g. in case of power failure)
  • connections for safety facilities such as warning light and 2-/4-wire light barrier (photo cell), as well as for an external consumer (DC 24 V), floating relay output
  • the operator is very reliable due to the patented SOMMER gear saving brake system, even with extreme forces of up to 3 tonnes applied, e.g. caused by wind load or vandalism

  Innovative:

  • regulated soft run, without power loss
  • smooth operation thanks to a spring mounted threaded bar

  Technical features:

  • gate weight per leaf: max. 1100 kg
  • gate width per leaf: max. 7000 mm
  • gate inclination 0 % (up to 10% in combination with special brackets)
  • gate filling max. 100 % filled (dependent of gate width and height)
  • operator principle: electromechanical swing gate operator with 8-gear stainless-steel threaded spindle and self-locking high-performance worm gear
  • push rod: made of polished stainless steel, non-corrosive, high buckling resistance
  • exterior tube: anodised aluminium, extremely good protection, even in extreme climatic conditions
  • bearing: maintenance-free slide bearing with excellent dry-running characteristics
  • housing: made of special, UV-resistant, non-ageing special synthetic material. It is more resistant to brittle fracture compared to the same housing of an aluminium alloy.
  • motor: high-performance DC motor with multiple downgearing and extra-reinforced gear steps, extremely reliable
  • motor protection: via microprocessor, with power monitoring
  • motor control board: DTA-1, 1- and 2-leaf gate installation
  • power supply: AC 220...240 V, 50/60 Hz; motor voltage DC 24 V
  • opening time: approx. 10–40 sec., depending on fixing point (see installation dimensions A+B)
  • opening angle: max. 121°
  • accident prevention: through electronic regulated force measurement
  • limit stop: limit switch with Reed contact
  • emergency release: fitted to the operator; secured with a lock, easy to use
  • LED-monitored function: mains / OPEN / CLOSE / safety, warning light, electric lock
  • soft start / soft stop: regulated soft run in ramp form, without power loss
  • connection possibilities: for light barrier (photo cell; 2-/4-wire), safety edge (only with an external evaluation unit), warning light, external consumer (DC 24 V, max. 0.1 A), floating relay contact, TorMinal, electric lock
  • automatic close function: can be set via DIP switch
  • dead man function: yes, can be set via TorMinal
  • pedestrian door function: yes
  • pulse mode: OPEN / STOP / CLOSE / STOP / ..., defined OPEN / CLOSE adjustable
  • close sequence: self-learning
  • number of radio channels: 2
  • operating mode: S3 40 %
  • protection class: operator: IP 44 / control unit: IP 65
  • temperature range: operator/control unit: –20°C / +70°C
  • Kit Includes:
  • 2 x Twist XL operator 
  • 1 x DTA-1 control board with built-in receiver
  • 1 x 4 channel Pearl remote control or 2 channel Pearl Twin remote control-
  • 1 x pair of photocells 7020V000 
  • Fastening elements
  • 24 months warranty card
  • Instruction